期刊論文 |
- 1. H. S. Chen , Chyouhwu Huang, J.-C. Hsiung, J.-N. Lee and K. H. Kung,” The Performance Improvement of the Spring Fastener for the Medical CPU Cooling Plate,” Life Science Journal , Vol.10, No.2 (June 25, 2013), pp. 283-289. (SCI)
- 2. Jeng-Nan Lee, Chih-Wen Luo, Hung-Shyong Chen, Huang-Kuang Kung and Ying-Chien Tsai, “Developing the Custom-made Femoral Component of Knee Prosthesis using CAD/CAM,” Life Science Journal , Vol.10, No.2 (June 25, 2013), pp. 259-264. (NSC 99-2632-E-230-001-MY3) (SCI)
- 3. J.-C. Hsiung, J Tzeng, K. Kung, H.-S. Chen, “A Study of Thermal Spray Coating on Artificial Knee Joints,” Life Science Journal , Vol.10, No.2 (June 25, 2013), pp.236-241. (NSC 99-2632-E-230-001-MY3) (SCI)
- 4. Huang-Kuang Kung, Hung-Shyong Chen, Ming-Cheng Lu, “The wire sag problem in wire bonding technology for semiconductor packaging,” Microelectronics Reliability, Volume 53, Issue 2 (Feb., 2013), pp. 288-296. (SCI)
- 5. Hung-Shyong Chen, Tsai Yau Bin M.D., Chyouhwu Huang, Jeng-Nan Lee, Huang-Kuang Kung, ” The Critical Dimension Definition of Femoral for Custom-made Total Knee Arthroplasty by the Application of Geometric Modeling,” Life Science Journal , Vol.9, No.2 (June 25, 2012), pp.196-201. (NSC 99-2632-E-230-001-MY3) (SCI)
- 6. H.-S. Chen, J.-N. Lee, J.-C. Hsiung, Jih-Yang Ko, ” The Metallographic Analysis Optimization of Aluminum Alloy for Medical Equipment Parts,” Life Science Journal ,Vol.9, No.2 (June 25, 2012), pp.202-206. (NSC 99-2632-E-230-001-MY3) (SCI)
- 7. J.-C. Hsiung, H.-K. Kung, H.-S. Chen, Kuan-Yu Chang,” Applications of Thermal Spray Coating in Artificial Knee Joints,” Life Science Journal, Vol.9, No.1 (March 25, 2012), pp.457-463. (NSC 99-2632-E-230-001-MY3) (SCI)
- 8. Hung-Shyong Chen , Jeng-Nan Lee, Chyouhwu Huang, Huang-Kuang Kung, “The Application of Arc Spraying to the Hard Facing of Wear-Resistant Multi-layer Plate,” Advanced Science Letters, Vol. 13 (30 June, 2012), pp.671-674. (SCIE)
- 9. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung, “Toolpath Generation and Error Analysis for Five-axis NC Machining of Spatial Cam,” Advanced Science Letters, Vol. 14 (July, 2012), pp.106-111. (SCIE)
- 10. Jeng-Nan Lee, Hung-Shyong Chen, Chih-Wen Luo, Yaw-Bin Tsai, Chih-Ming Huang, “Geometric Modelling and Multi-axis NC Machining for the Femoral Component of Knee Prosthesis,” Advanced Science Letters, Vol. 8 (15 April, 2012), pp. 125-129. (SCIE)
- 11. 陳鴻雄, ” 建築物機水電工程施工-常見缺失探討,” 中工高雄會刊,中國工程師學會高雄市分會, 19卷2期, 100年12月, 61-76頁.
- 12. Hung-Shyong Chen, Jeng-Nan Lee, Huang-Kuang Kung, “Application of Taquchi Method in the Optimization of PTA Hardfacing Process,” Advanced Materials Research, Vols. 314-316 (2011) pp. 86-93. (EI) (NSC 96-2622-E-230 -007 -CC3)
- 13. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung, “Geometric Modeling and Five-axis NC Machining for Centrifugal Impeller,” Advanced Materials Research, Vols. 314-316 (2011) pp. 1556-1561. (EI)
- 14. Jeng-Nan Lee, Hung-Shyong Chen, and Huang-Kuang Kung, “The Profile Design and Multi-Axis NC Machining of Cylindrical Cam with Boat-Shape Follower,” Advanced Science Letters, Vol. 4 (2011), pp. 2764–2769. (SCIE)
- 15. Jeng-Nan Lee, Ying-Chien Tsai, Hung-Shyong Chen and Huang-Kuang Kung, “An Integrated Approach of CAD/CAM for Spatial Cam with Oscillating Cylindrical Rollers,” Advanced Materials Research, Vols. 201-203 (2011) pp. 318-325. (EI)
- 16. 熊仁洲、龔皇光、陳鴻雄、謝興達, “熔射覆膜技術於人工膝關節鈦合金材料表面改質之分析研究,” 銲接與切割(Welding & Cutting), 第21卷, 第2期, p.35-42, June 2011.
- 17. 李政男、陳鴻雄、龔皇光,” 具圓柱嚙合件空間凸輪之幾何設計與曲率分析”, 先進工程學刊(Journal of Advance Engineering), 第六卷, 第一期, p. 45-52, Jan. 2011.
- 18. Jeng-Nan Lee, Hung-Shyong Chen, Chih-Wen Luo, Kuan-Yu Chang, “Rapid Prototyping and Multi-axis NC Machining for The Femoral Component of Knee Prosthesis ”, Life Science Journal, Vol.7, No.1,March 15, 2010, p.79-83. (SCI)
- 19. Jeng-Nan Lee, Chih-Wen Luo, Hung-Shyong Chen, “Interference-Free Multi-axis NC Machining of Cylindrical Cam Using Enveloping Element”, Journal: Key Engineering Materials, Vols. 419-420 (2010), p. 333-336. (SCI/EI)
- 20. 李政男、蔡穎堅、龔皇光、陳鴻雄、熊仁洲, ”具圓柱嚙合件空間凸輪之幾何設計與五軸加工”, 機械零組件通報, 財團法人精密機械研究發展中心, 2009年11月 雙月刊, p.3-11.
- 21. Huang-Kuang Kung , Yun-Ping Sun, Jeng-Nan Lee, Hung-Shyong Chen, “A method to determine the sweep resistance of wire bondsfor microelectronic packaging”, Microelectronic Engineering, Vol. 85, Sep. 2008, p.1902-1909.(SCI/EI)
- 22. 楊協澤、陳鴻雄、龔皇光, “感光時間對玻璃貼合用UV膠接著性能之影響評估”, Journal of Tung Fang Institute of Technology , 第25期, 94年10月, p. 1~15.
- 23. Huang-Kuang Kung, Hung-Shyong Chen, Bo-Wun Huang, “Thermal-Fatigue Oxidation of Carbon-Fiber Reinforced Polyimide Composite”, Journal: Key Engineering Materials, Vol. 261, 2004, p.1191-1202. (SCI)
- 24. Hung-Shyong Chen, Huang-Kuang Kung and Chyouhwu B. Huang, “A Study for the Moisture Content of Graphite/EpoxyComposite with Hygrothermal Cycling”, SME technical paper TP04PUB47, (Dearborn, Mich.: Society of Manufacturing Engineering, 2004).
- 25. 陳鴻雄、呂丰君、邱議德、陳鴻基, “非同步網路學習下任務型態與困難度對合作學習績效與滿意度之研究:大學體系與技職體系之比較”, 資訊管理學報, 第十卷, 第一期, 2003年7月, pp.233-246. (TSSCI) (NSC-90-2520-S-230-001)
- 26. Hung-Shyong Chen, “The Static and Fatigue Strength of Bolted Joints in Composites with Hygrothermal Cycling”, Composite Structures,Volume 52, May-Jun 2001, p.295-306. (SCI,EI)
- 27. 黃柏文、龔皇光、陳鴻雄, “軸承故障對策之資料庫程式建構”, 機械月刊, 第324期, 2002年7月, pp.30-35.
- 28. S. S. Russell, M. A. Sutton and Hung-Shyong Chen, “Image Correlation Quantitative Nondestructive Evaluation of Impact and Fabrication Damage in a Glass Fiber-Reinforced Composite System”, Materials Evaluation, Vol. 47, May 1989, p.550-557. (SCI)
|
近期研究 |
- 1. Jeng-Nan Lee, Ming Yang Guan, Chyouhwu Brian Huang, Hung-Shyong Chen, and Huang-Kuang Kung,” Geometrical Modeling and Multi-axis NC Machining for the Volar Plate of the Distal Radius,” The 16th International Conference on Advances in Materials and Processing Technologies (AMPT 2013), September 22-26, 2013, Taipei, Taiwan. (NSC 99-2632-E-230-001-MY3)
- 2. Chyouhwu Huang, H.-S. Chen, “Heat Insultating Materials Thermal Conductivity Determination by Means of Comparison with a Standard Plate of Known Conductivity,” ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012) , November 9-15, 2012, Houston, Texas, USA, IMECE2012 89382.
- 3. J.-C. Hsiung, H.-J Tzeng, H.-K. Kung, H.-S. Chen, “A Study of Thermal Spray Coating on Artificial Knee Joints,” 2012 International Symposium on Mechatronic and Biomedical Engineering & Applications, , Cheng Shiu University, Kaohsiung, Taiwan, 2012/11/08, ISBN:978-986-7339-79-9.
- 4. Chyouhwu Huang, J.-C. Hsiung, J.-N. Lee , H. S. Chen, K. H. Kung,“ The Performance Improvement of CPU Cooling Plate Spring Fastener,“ 2012 International Symposium on Mechatronic and Biomedical Engineering & Applications, , Cheng Shiu University, Kaohsiung, Taiwan, 2012/11/08, ISBN:978-986-7339-79-9.
- 5. J. N. Lee, C. W. Luo, H. S. Chen, K. H. Kung and Y. C. Tsai, “ Developing The Custom-made Femoral Component of Knee Prosthesis using CAD/CAM”, 2012 International Symposium on Mechatronic and Biomedical Engineering & Applications, , Cheng Shiu University, , Kaohsiung, Taiwan, 2012/11/08, ISBN:978-986-7339-79-9.
- 6. K. H. Kung, J.C. Hsiung, J. N. Lee, H. S. Chen, Y.H. Lin, C.L. Hsieh,” Study of Wire Sweep Relaxation and Rebound for 3-Dimensional/Multi-Chip Module Packages,” 2012 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2012/11/08, ISBN:978-986-7339-79-9.
- 7. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung, “Application of the Envelope Theory in Machining of Helicoids on Multi-axis Machine Tool”, 15th International Conference on Advances in Materials and Processing Technologies (AMPT2012), September 23-26, 2012, Wollongong, NSW Australia.
- 8. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung, “Multi-axis Machining of Helicoids Using the Generating Method,” 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 11-14, 2012, Kaohsiung, Taiwan. (EI)
- 9. Huang-Kuang Kung, Hung-Shyong. Chen, Ming-Cheng Lu, Che-Chang Li,” Wire Sweep Analysis for Copper Wire and Pd-coated Copper Wires in Semiconductor Wirebonding Technology,” Joint Conference of “International Conference on Electronics Packaging “ and “IMAPS All Asia Conference” (ICEP-IAAC 2102), FC2-1, Tokyo, Japan, April 17-20, 2012.
- 10. Hung-Shyong Chen, Jeng-Nan Lee, Chyouhwu Huang, Huang-Kuang Kung,” The Application of Arc Spraying to the Hard Facing of Wear-Resistant Multi-layer Plate,” 2011 International Symposium on Mechanical Science and Technology(ISMST 2011), December 20-21, 2011, Guangzhou, China.
- 11. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung,” Toolpath Generation and Error Analysis for Five-axis NC Machining of Spatial Cam,” 2011 International Symposium on Mechanical Science and Technology(ISMST 2011), December 20-21, 2011, Guangzhou, China.
- 12. Jeng-Nan Lee, Hung-Shyong Chen, Chih-Wen Luo, Yaw-Bin Tsai, Chih-Ming Huang,” Geometric Modelling and Multi-axis NC Machining for the Femoral Component of Knee Prosthesis,” The First International Conference on Engineering and Technology Innovation 2011 (ICETI 2011), November 11-15, 2011, Kenting, Taiwan.
- 13. H.-S. Chen, J.-N. Lee , Chyouhwu Huang, H.-K. Kung , J.-C. Hsiung,” A Study on the Metallographic Analysis Optimization of Aluminum Alloy,” 2011 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2011/11/08, ISBN:978-986-7339-69-0.
- 14. J. N. Lee, H. S. Chen, K. H. Kung,” Toolpath Generation and Five-axis NC Machining for Centrifugal Pump Impeller,” 2011 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2011/11/08, ISBN:978-986-7339-69-0.
- 15. J.-C. Hsiung, H.-K. Kung, H.-S. Chen, Kuan-Yu Chang,” Applications of Thermal Spray Coating in Artificial Knee Joints,” 2011 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2011/11/08, ISBN:978-986-7339-69-0.
- 16. Hung-Shyong Chen, Jeng-Nan Lee, Huang-Kuang Kung,” Application of Taquchi Method in the Optimization of PTA Hardfacing Process,” The 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011), Guangzhou, September 16-18, 2011. (NSC 96-2622-E-230 -007 -CC3)
- 17. Jeng-Nan Lee, Hung-Shyong Chen, Huang-Kuang Kung,” Geometric Modeling and Five-axis NC Machining for Centrifugal Impeller,” The 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011), Guangzhou, September 16-18, 2011.
- 18. J.-C. Hsiung, Yu-Ting Tung , H.-J.Tzeng, H.-K. Kung, and H.-S. Chen,” A Study of Structure and Process Parameters of Low Stress Spiral Wound Gasket,” 6th International Symposium in Science and Technology at Kansai University 2011, Osaka, Japan, 2011/8/24~26.
- 19. J.-C. Hsiung, R.-T. Shieh, H.-J.Tzeng, H.-K. Kung, and H.-S. Chen,” Effect of Cryogenic Treatment on the Impact and Wear Properties of Plastic Lenses,” 6th International Symposium in Science and Technology at Kansai University 2011, Osaka, Japan, 2011/8/24~26.
- 20. H.-S. Chen, J.-C. Hsiung, H.-K. Kung,” Matching Wire Sweep Design for 3-dimensional and Multi-chip Module Packaging during Transfer Molding Process,” International Conference on Electronics Packaging 2011 (ICEP 2011), TD1-2, Nara, Japan, April 13-15, 2011.
- 21. Jeng-Nan Lee, Ying-Chien Tsai, Hung-Shyong Chen and Huang-Kuang Kung,” An Integrated Approach of CAD/CAM for Spatial Cam with Oscillating Cylindrical Rollers,” The 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), Guilin, China, April 9-11, 2011.
- 22. H. S. Chen, J. N. Lee, K. H. Kung, J.C. Hsiung, “A Study on the Application of PTA Welding to the Wear-Resistant Plate”, 2010 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2010/11/09, ISBN:978-986-7339-62-1.
- 23. H.S. Chen, J.C. Hsiung, J. N. Lee, H.K. Kung, “On the Applications of Ellipse Cross Section of Gold Wire Bond for the Semiconductor Packaging”, 2010 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2010/11/09, ISBN:978-986-7339-62-1.
- 24. J.-C. Hsiung, Hsinn-Jyh Tzeng, H.-K. Kung, H.-S. Chen, J.-N. Lee, “Void Formation in Die Attach Adhesives”, 2010 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2010/11/09, ISBN:978-986-7339-62-1.
- 25. J. N. Lee, C. W. Luo, H. S. Chen, K. H. Kung, Y. C. Tsai, “Reverse Engineering and Rapid Prototyping for the Femoral Component of Knee Prosthesis”, 2010 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, 2010/11/09, ISBN:978-986-7339-62-1.
- 26. Jeng-Nan Lee, Ying-Chien Tsai, Hung-Shyong Chen, Huang-Kuang Kung, “Geometry Design and Five-Axis Nc Machining of Spatial Cam with Cylindrical Rollers”, The First IFToMM Asian Conference on Mechanism and Machine Science, Taipei, Taiwan, October 21 - 25, 2010.
- 27. Jeng-Nan Lee , Hung-Shyong Chen, Huang-Kuang Kung, “The Profile Design and Multi-axis NC Machining of Cylindrical Cam with Boat-shape Follower”, 2010 International Symposium on Mechanical Science and Technology(ISMST 2010), September25 - 29, 2010, Guangzhou, China.
- 28. Jeng-Nan Lee, Ying-Chien Tsai, Hung-Shyong Chen, “Interference-free Five-axis NC Machining and In-process Measurement of Cylindrical Cam Using Enveloping Element”, 10th International Symposium on Measurement and Quality Control, September 5-9, 2010, Osaka, Japan.
- 29. Jeng-Nan Lee, Ying-Chien Tsai, Hung-Shyong Chen, Huang-Kuang Kung,“ The Profile Determination and Five-axis NC Machining of Spatial Cam with Oscillating Cylindrical Rollers“, 5th International Symposium in Science and Technology at Cheng Shiu University 2010, Kaohsiung, Taiwan, August 24-25, 2010.
- 30. J.-C. Hsiung, C.-P. Liu, H.-J.Tzeng, H.-S. Chen, H.-K. Kung, “A Study of Mechanical and Sealing Properties of Spiral Wound Gaskets”, 5th International Symposium in Science and Technology at Cheng Shiu University 2010, Kaohsiung, Taiwan, August 24-25, 2010.
|